Twin band saw with 2-sides log clamp
Robot twin band saw
■No operator required This is the latest machine that is ideal for streamlining the factory.
Product summary
This is a fully automatic machine controlled by a computer.
Log is rotated 360 degrees and the shape is measured by 5 sensors. Computer analyzes the data to set the log into best position for sawing. Sawing pattern is set automatically using board sizes and each size priority, set by operator.
Log diameter max. | 50cm bottom end (Rotational diameter) |
---|---|
Log diameter min. | 13cm top end |
Log length |
3m(2950 ~ 3200mm) 4m(3950 ~ 4200mm) |
Product summary
Center timber is unloaded in the back of saw unit. While the carriage is going back, operator has time to rotate and position the next log. Loss time is minimized.
Log diameter max. | 50cm bottom end |
---|---|
Log diameter min. | 10cm top end |
Log length |
3m (2950 ~ 3200mm) 4m (3950 ~ 4200mm) |
Product summary
Operator chooses the sawing pattern from data input in memory according to log diameter and shape. After the cutting starts, next log is rotated and set to the best position for sawing. When the center timber discharged, pre-set device slides to charge the next log. Minimum time loss, high yield.
Log diameter max. | 50cm bottom end |
---|---|
Log diameter min. | 13cm top end |
Log length |
3m (2950 ~ 3200mm) 4m (3950 ~ 4200mm) 6m (5950 ~ 6200mm) |
Type PRA
■High productivity as fully autometed AN type. Operator only sets sawing pattern.
Log carriage with 90 degree automatic rotation function
-
Log and cant positioning
-
Easy operation does not cause fatigue.
Product summary
Operator positions the log using a pre-set device. After the log is set on carriage, the 90 degree turn of center timber is done automatically to shorten the cycle time.
Log diameter max. | 50cm(Rotational diameter) |
---|---|
Log diameter min. | 13cm |
Log length | 3m, 4m |
Product summary
Positioning of log is selected by operator in front of sawing unit. Center timber is discharged at the same time as next log in loaded. Machine of AS type with bigger saw wheels available for logs up to 80cm. Simple operation, reliability, low investment cost.
Log diameter max. | 50cm bottom end |
---|---|
Log diameter min. | 16cm top end |
Log length | 3m(2950 ~ 3200mm) 4m(3950 ~ 4200mm) |
-
Log and cant positioning
-
Control panel
Product summary
Operator rotates the log manually to set the sawing position. Simple machine with low automation for small logs cutting.
Log diameter max. | 30cm bottom end |
---|---|
Log diameter min. | 12cm top end |
Log length | 3m(2950 ~ 3200mm) 4m(3950 ~ 4200mm) |